To run the model.

	1) Double click on the batch file, RUN_FEMFLOW3D.BAT.


To view the model results.

	1) There are a number of outputs that should be reviewed after the model is run.
	All of the outputs can be reviewed with a text editor.  For 
	example if you wish to view the model budget, you can open the .BUD.OUT 
	in any standard text editor.  For a more in-depth description of
	file contents refer the the FEMFLOW3D V2.0 manual. 

	2) If you wish to view the computed heads for a model run, you will have to obtain
	a free copy of GMS at http://www.ems-i.com/

		A) Start GMS
		B) Load the 3DM from the model run.
			1) File>Open
			2) Change the File Type to *.*
			3) Select the 3DM
		C) Load the HEAD PLT 
			1) File>Open
			2) Select the *.HED.PLT
		D) Review the GMS documentation to adjust the displays as needed.

	3) A copy of the head results have been pre-loaded into a GMS folder for your convience.
	To review the results in GMS:
		A) Open the *.GPR file in GMS, all preloaded files will load.
		B) If you wish to change viewing attributes, review the GMS documentation.


	*Note: The pre-loaded GMS folder uses a model that is spatially based on METERS, which has
	no bearing on viewing the outputs.  The METERs version was included to correlate the model domain with
	preexisting shape files coordinates.